Vent-Axia - Sentinel Kinetic Plus B

Key Features

• Suitable for houses up to 260m2
• Up to 91% heat recovery whilst controlling condensation
• Programmable Summer bypass
• Left or right hand installation
• Horizontal and/or vertical duct outlets
• Integrated digital controller for simple and accurate commissioning
• External condensate connection
• Plug and play controls; Humidistat, Vent-Wise, Wireless remote
• Multiple switching options: Light switch, PIR, Humidistat etc.
• Weight: 24kg
• Spigot diameter 150mm
• Dimensions - Height 785mm x Length 635mm x 550mm

Suitable for houses up to 260m2 and meets the latest requirements of the Building Regulations ADF and ADL for whole house system ventilation.

Filtration
2 x G4 with the option of a M5 pollen intake filter

Controllability
The Lo-Carbon Sentinel Kinetic Plus B have 3 fully adjustable speeds and a purge setting (maximum flow). Provided with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range

Boost can be achieved with almost any type of sensor or switch including momentary

Integral Humidity Sensor
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature

Construction
The outer enclosure is constructed of PVC with the inner body being constructed of EPP

Motors
The unit has 2 x low energy, high efficiency EC/DC motors

Installation
Spigot Options The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation

Accessories
In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

Download the manual for the Vent-Axia - Sentinel Kinetic Plus B